GOALRILLA B3300W, Owner'S Manual

Page: 12 / 14

1 3M-6558-00 5 X 5 Tube Plug 1
2 1A-6994-00 Post Assembly 1
3 2B-6093-10 1/2 Flat Washer 16
4 2B-6095-10 1/2-13 Nylon Insert Locknut 3
5 3M-6245-00 1 1/4 Dia. Plastic Washer 24
6 1A-6995-00 Upper Board Arm 1
7 1B-6787-10 1/2-13 X 9 Hex Bolt - Grade 5 1
8 1B-6222-10 1/2-13 X 10 Hex Bolt - Grade 5 2
9 3M-6274-00 1 X 2 Tube Plug 2
10 3M-6834-00 1 9/16 x 3 5/32 Tube Plug 2
11 1A-6996-00 Lower Board Arm 1
12 Not Used
13 1
14 8S-6565-01 Pivot Tube 1
15 2M-6160-00 Actuator Sleeve 1
16 4A-7081-00 Actuator 1
17 4L-7830-00 Height Decal 1
18 2B-6094-10 1/2 Split Lock Washer 2
19 1B-6215-10 1/2-13 x 1 Hex Bolt 2
20 1B-6781-10 1/2-13 x 2 1/4 Hex Bolt 4
21 3M-6473-00 Rim Pad - 3 X 4 1
22 7B-6391-00 Step Bushing 4
23 6A-7407-00 Backboard Assembly - 38" x 54" 1
24 Not Used
25 Not Used
26 2B-6237-10 3/8 x 19mm Flat Washer 4
27 3M-6835-00 Goal Spacer Plate (Pre-Installed) 1
28 6A-6329-01 Goal Assembly 1
29 1B-6782-10 3/8-16 X 1 3/4 Carriage Bolt 4
30 3F-6010-00 Net 1
31 2S-6427-00 Rim Cover Plate 1
32 1B-6788-00 #8 X 1/2 Self Tapping Screw 4
33 2B-6238-10 3/8-16 Nylon Insert Locknut 8
34 3M-6469-00 5/8 Thread Protector 4
35 2B-6097-01 5/8-11 Hex Nut 12
36 2B-6099-01 5/8 Split Lock Washer 4
37 2B-6098-02 5/8 Flat Washer 8
38 2S-6494-01 Anchor Plate 1
39 2B-6096-01 5/8-11 X 18 “J” Bolt 4
40 1S-6152-00 #3 X 40 Rebar 4
41 7B-6255-00 Pull Pin 1
42 4A-6550-01 Actuator Handle 1
43 2L-7165-03 This Manual 1
44 2S-6794-00 Post Bracket 2
45 2B-6237-10 3/8" Flat Washer 8
46 1B-6936-10 3/8-16 X 1 1/4" Hex Bolt-Grade 5 4
47 2B-6242-10 1/2-13 Nylon Insert Locknut 4
B3300W PARTS LIST
Key# Part # Description Qty. Key# Part # Description Qty.
2L-7165-03
CARE AND MAINTENANCE
BACKBOARD CARE AND MAINTENANCE
Items needed to clean backboard:
100% cotton soft cloth, (only) Glass cleaner
Clean backboard using only a 100% Cotton soft cloth and glass cleaner. Clean glass as you would clean household windows. Strong cleansers will
damage backboard and void warranty.
RIM
Only hang from the rim briefly to regain balance or avoid injuring others. Release the rim as soon as safely
possible.
Rims are not warranted for any defects other than workmanship. Torn back plates, damaged springs, bent rings, damaged eye bolts, and torn
or distorted rim supports result from hanging on the rim and are not warranted.
The goal should not be cranked over 10'. Adjustments of the goal should be done under adult supervision.
When attempting slam dunk activity you should always wear a mouth guard to avoid dental injury.
RUST
MAINTENANCE
To ensure ease of operation, lubricate all pivot points at least every 6 months or as needed with a good lubricant such as WD-40.
Inspect your pole periodically, if rust should appear , remove loose paint, sand lightly, primer and paint with exterior flat matte finish
enamel paint.
3M-8939-00 Actuator Cap (with hole)
12