6
7
Goal Zero Switch 10 is designed to charge POV cameras,
phones, and other handheld USB-powered gear.
1. Using your
gear’s charging cable
, plug into Goal
Zero Switch 10’s
USB output.
2. Goal Zero Switch 10 will
automatically begin
charging
when you plug in your gear.
You can also use the micro-USB cable included with
Switch 10 to charge compatible devices.
CHARGE YOUR GEAR
Built-In Flashlight
Goal Zero Switch 10 also comes
with a small, built-in flashlight.
Turn it on/off by lightly pressing
the button on the light.
FLASHLIGHT
Built-In
Flashlight Button
The battery inside the Goal Zero Switch 10 is
replaceable. Over time, the lithium battery inside Goal
Zero Switch 10 will lose its efficiency. If you notice
your Goal Zero Switch 10 isn’t holding a charge, or is
no longer charging your gear as much, it might be time
to replace the battery.
1.
Unscrew the USB charging end
(Bottom) of Goal
Zero Switch 10 by grasping the black cap and
twisting to the left.
2.
Remove the old battery
and
insert the new Goal
Zero 18650 lithium battery
in either direction.
3.
Reattach the black cap
and
plug
Goal Zero Switch
10
into
a live USB port
.
You’ll need to
purchase the replacement
a Goal Zero
18650
lithium battery from GoalZero.com
– please
note, Goal Zero Switch 10 is not compatible with
any other 18650 lithium battery. Our batteries are
engineered with built-in protections and are optimized to
power Goal Zero gear.
TROUBLESHOOTING
Goal Zero Switch 10 Reset:
Plug Goal Zero Switch 10 into any live USB port to reset it.
REPLACEABLE BATTERY
Phone
1x
Tablet
25% Boost
What It Powers:
POV Camera
2x
7”
