Original instruction manual
En
44 04/2019
GENERAL SAFETY INFORMATION
1. Read all instructions carefully before using the appliance.
2. Make sure the voltage is the same as that indicated on the
rating plate of the appliance.
3. Do not operate this appliance if the cable or plug becomes
damaged.
4. Keep the appliance and cable away from sources of heat,
sharp objects or anything that may cause damage.
5. If the cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
6. Ensure the appliance is switched off before connecting to
the mains power supply.
7. Switch off the power supply and disconnect from mains
supply when not in use, before cleaning or other
maintenance.
8. To disconnect the appliance, switch it “0”, and then remove
the plug from outlet. Do not pull the cord to disconnect the
plug.
9. The heater must not be located immediately below a
socket-outlet.
10. Do not operate in areas where gasoline, paint or other
flammable liquids are used or stored.
11. Indoor use only.
12. In order to avoid overheating, do not cover the heater.
13. To prevent a possible fire, do not block air intakes or
exhaust in any manner.
14. Don’t touch the hot surfaces.
15. Do not insert or allow foreign objects to enter any ventilation
or exhaust opening, as this may cause an electric shock,
fire or damage to the appliance.
16. Always ensure that hands are dry before operating or
adjusting any switch on the product or touching the plug and
socket-outlet.
