19
Network Maintenance
Network Diagnostics
The Services Z-Wave network periodically
checks to determine if a network device has
become un-plugged, has failed, or is missing.
The network can also be checked manually by
pressing the
CHECK NETWORK
button on the
Manage Z-Wave Devices screen.
If there is a network issue, the
SERVICES
button on the Home Screen will display as
orange
instead of
blue
.
The
CHECK NETWORK
button will display as
orange
instead of
blue
if there is a network
issue.
Use the following steps to correct a network
issue.
1.
Press the orange
SERVICES
button. The
Manage Services Screen will be displayed.
2.
The Z-Wave logo will be displayed, along with
the trouble alert
icon. The trouble alert
icon displays a number in the upper right corner
that is the number of devices the network has
detected trouble with.
3.
Press the trouble alert
icon to display the
device(s) the network has detected trouble with.
4.
Go to the displayed devices location(s) and
inspect for un-plugged or missing devices. Either
correct the devices installation, or remove the
device from the network using the following
steps. Press
BACK
to exit without making any
changes.
5.
To remove a failed device, press the device’s
button on the Failed Devices Screen. Press
REMOVE FAILED DEVICE
. A confi rmation
screen will be displayed, press
OK
.
Checking the Network
The Z-Wave network can be checked manually
using the
CHECK NETWORK
button. Use the
following steps:
1.
From the Manage Z-Wave Devices Screen, press
the
CHECK NETWORK
button.
2.
Wait while the system checks the network.
THIS MAY TAKE SEVERAL MINUTES.
3.
Any new or failed network nodes will be
displayed.
Device Removed Confi rmation Screen
Checking Network Screen
Trouble Alert Screen
Z-Wave
trouble icon
Delete Failed Devices Screen
Push device
button to
remove
Home Screen with Orange Button
Services button
turns orange
