12
The
seat
and
back cushions
are constructed of high-quality
closed-cell foam thoughtfully designed and manufactured to
assure maximum comfort and protection. Ensure that you do not
place any heavy and/or pointed objects on top of them or pack
anything on top of them (such as any other part of the chair).
Because the foam is closed-cell, it will not spring back after being
compressed for extended periods of time. Any indentations in the
foam caused by such compression may become permanent.
Do
not place anything sharp on top of the cushions as the vinyl
surface can puncture or tear.
12.
Assembly is complete. Return the
accessory bag
along
with the
upholstered foam divider
, to the travel case for storage.
OPERATING INSTRUCTIONS
1.
Engage the brakes on the casters by depressing the brake
levers. Release them by lifting up on the levers.
IMPORTANT:
ALWAYS ENGAGE ALL FOUR (4) TOTAL-LOCK
BRAKES BEFORE TRANSFERRING TO OR FROM THE CHAIR.
FOR STABILITY AND SAFETY, ENSURE THAT BOTH FRONT
AND REAR WHEELS ARE LOCKED IN POSITIONS SUCH THAT
THE
CHAIR’S WHEELBASE IS AT ITS MAXIMUM, I.E.: THE
WHEELS ARE
NOT
TURNED IN, BENEATH THE CHAIR!
2.
IMPORTANT
:
Never
attempt to use your GO-Anywhere
Chair™ without both
cross-braces
being properly installed.
Attempting to use the chair without them could cause structural
failure which could result in serious injury or death.
3.
To recline the
seat back
or return it to upright from a
reclining position, push forward slightly on the
seat back,
squeeze
and hold the adjustment lever on the
push rail
while carefully
letting the
seat back
fall toward you or forcing it forward, away
from you. Release the adjustment lever allowing the
seatback
assembly
to “click” into one of 4 permissible position settings.