Page 13 of 15
Pressure Measurement Amplifier DMV 4000
Parameter levels (PAR)
Is divided up as follows:
Alarm set-points: Adjusting the separate alarm contacts 1 - 3
Alarm parameter menu: Adjusting the hysteresis and delay times of alarms 1 - 3
Alarm reaction times: Adjusting the reaction times from 0 to 30 seconds
Calibration mode CAL)
Is divided up as follows
Sensor calibration menu:
Calibration of Zero and Span (
C-all
C-all
C-all
C-all
)
:
::
:
=
By activation the display (yes /
) through
button
a zero and span calibration is performed
After approx. 10 seconds the DMV4000 is fully functional
Calibration via Calibration point (
C-Hi
C-Hi
C-Hi
C-Hi
): By activating the display (yes /
) through
the button
a calibration function of the display is performed. After approx. 10 seconds the
DMV4000 is fully functional.
=
=
