background image

 

WARRANTY 

 

GNC Industries, Inc., P-Series Pumps are warranted by GNC   Indus-
tries, Inc. GNC Industries, Inc. will repair or replace         (at GNC In-
dustries,  Inc.’s  option)  any  part  or  assembly,  free  of  charge,  if  that 
part or assembly fails within twelve months        (1 year) from the 

date of purchase, provided the failure is due to an unmistakable de-
fect in material or workmanship.  
No allowance will be made for consequential damage, labor or    ex-
penses  incurred  as  the  results  of  a  proven  defect.    In  no  event  will 
GNC  Industries,  Inc. be  liable  for  any loss of  profits or  other  conse-
quential damages, even if GNC Industries, Inc. has been    advised of 
the possibility of such damages. 
GNC Industries, Inc. assumes no responsibility for accidents or   inju-
ries resulting from maintenance or adjustment of product while prod-
uct is in operation. 
Since GNC Industries, Inc.  has no control  over  the operational  tech-
niques or chemicals used, GNC Industries, Inc. assumes no liability for 
the consequences of the use or misuse of any equipment by the pur-
chaser, their employees or others. 
Maximum operation speed and pressure is specified in individual and 
applicable instructions. 
GNC Industries, Inc. reserves the right to improve any product with-
out being obligated to provide that change on equipment sold and/or 
shipped prior to the product change. 
Modification of equipment voids all warranties written or implied. 

Summary of Contents for P530












Reviews: