GNATUS ENDUS, Owner'S Manual, Page: 40 / 76

40
Plug in the measurement cable (C) on
the equipment, connect the other
extremities of the cable to the file
support (D) and to the labial clip (E),
according to (Fig.02).
Warning: Check that the plug is firmly
connected to the inlet. The wrong
connection can interfere with the
correct measurement.
Turn on the equipment (F) to certify
that the installation was conducted
correctly.
ALWAYS HOLD THE CONNECTORS TO CONNECT OR DISCONNECT THE
CABLES.
EQUIPMENT INSTALLATION
C
E
D
F
To use the equipment you should
proceed with the installation of the
batteries. The batteries compartment
is located on the back of the
equipment (Fig.01).
Remove the back cover (A) and insert
the 5 batteries AAA 1,5V (B).
Fig.01
Fig.02
A
B