13
Refer to the instruction manual.
Indicates cycle end
Indicates that the device is in
heating mode
Indicates that the device is in
sterilization mode
Indicates cycle cancellation
Indicates drying
Indicates cycle start
Indicates that the device is on
Product symbols
INSTALLATION OF EQUIPMENT
The installation of this equipment requires the necessity of specialized technical assistance
(Gnatus). Ask for the presence of a Gnatus representative technician at the nearest seller,
or through the Gnatus Service Center: + 55 (16) 3512-1212.
Note
That information are also part of the Installation and Maintenance Manual of the equipment
that is found with the Gnatus authorized technical representative.
Important safety considerations
- Never touch the steam external outlet and, after the sterilization is finished, never touch the
internal autoclave’s surfaces. The inappropriate use may cause burns. Gnatus may not be hold
responsible for accidents caused by inadequate operation.
- Don’t allow patients, and most specially children, to touch the autoclave.
- Periodically check that the door’s door latch is correctly in place before operation. If this procedure
were not observed, the sealing ring may come off.
- Before using the autoclave, verify that the internal chamber is clean, also check if the protection
filter is completely clean, free of residues.
TECHNICAL SPECIFICATIONS
