GMX MOTORBIKES Rumble 150cc, Assembly Manual, Page: 17 / 49

13
PRE-RIDE INSPECTION
Inspecting and checking the condition of
the Go Kart before each ride is important.
Following the pre-ride check list will
help insure the you do not have
mechanical problems which could result
in injury or becoming stranded. Make
sure the Go Kart is in good operating
condition before each operate.
WHAT TO
CHECK
CHECK FOR
Steering
•
Smoothness
•
No restriction of
movement
Brakes
•
Correct fluid level
•
Inspect hoses for leaks
•
Inspect brake pads for
wear.
Tires
•
Proper tire pressure
•
Proper tread depth
•
Rubber has no cracks
Fuel Tank
•
Enough fuel for the ride
•
Fuel cap secure
•
Hoses have no signs of
cracks or leaks
Throttle
Pedal
•
Pedal snaps back to
idle when released
•
Operates freely
Lighting
•
Proper operation of
Head lights and Tail lights.
Engine
Ignition
switch
•
Switch shuts off
engine when activated.
Engine Oil
•
Correct oil level
Forward/
reverse
lever
•
No damage
•
Operates as intended
Drive
Chain
•
Proper tension
•
Lubricated
•
No excessive wear or
damage
General
Condition
•
All nuts and bolts tight
•
No rattles from engine
or frame while running
OPERATING THE GO KART
△
!
WARNING
Performing maintenance and
checks while the engine is running
could be hazardous.
You could be severely injured by moving
parts or hot surfaces.
Never perform maintenance or check
procedures while the engine is running
with the exception of
checking the ignition switch or
throttle.
△
!
WARNING
Failing to inspect and maintain your Go
Kart could be hazardous.
Not following the pre-ride inspec- tion
procedures could result in loosing control
of the Go Kart resulting in an accident or
damage to the Go Kart
Always perform a Pre-ride inspection
before each operate. tion before each
operate.