manualshive.com logo in svg

GMX MOTORBIKES EXTREME 125cc, User Manual, Page: 14 / 28

Share
Download
GMX MOTORBIKES EXTREME 125cc User Manual Download Page 14

MAINTENANCE

SPARK PLUG

 

- Remove the coil/lead from the spark plug.

- Remove the spark plug with the correct tool.

- Clean around the contactors (where the spark is emitted from) 

or replace the unit.

- Ensure the Gap at the contactors is 0.6-0.7mm.

PLEASE NOTE:

 If you do not feel competent to fulfil ANY 

maintenance tasks, please consult a qualified motorcycle 

mechanic.

AIR FILTER

Check the air filter after each usage of the vehicle. Where 

applicable remove the air filter for cleaning.

Wash the filter or soak it with air filter cleaner or machine oil, if 

the filter is in any way damaged, please source a replacement 

filter appropriate for your product.

 

CAUTION:

 Make sure the air filter is correctly fitted to the bike. 

Failure to fit the filter will result in contaminants entering the 

engine and cause fatal damage to the engine & components  

THROTTLE

 

The throttle of your vehicle directly affects the speed of your 

product, it should be in perfect working order before each time 

you ride your product. Check and ensure that the cable and 

all mechanical parts included in the throttle system are moving 

freely.

The carburettor is also considered part of the throttle system 

and may also require adjustment. It is not advised to make 

adjustments whilst the engine is running. Repeat adjustments 

whilst the engine is off and test each adjustment afterwards.

TO ADJUST THE CARBURETTOR:

- Support the vehicle by means of the side stand.

- Adjust the idling speed using the adjustment screw (recom-

mended r/min are aprox. 1500 r/min)

PLEASE NOTE:

 Do not make adjustments to a cold engine as 

this is the most changeable state of the engines running. 

Adjustments should not be made by unqualified persons, if in 

doubt please consult a qualified mechanic. 

CHAIN

It is advisable to visually check the chain of your ATV before 

each use. Its general condition is important, there should be no 

obstructions to the chain, it should be well lubricated and under 

the correct tension

LIGHTS

Should your ATV include front/rear lights or signalling lights, it is 

Summary of Contents for EXTREME 125cc





























Reviews:

No comments