manualshive.com logo in svg

GMW IPP 144-40 GS, User Manual, Page: 4 / 40

Share
Download
GMW IPP 144-40 GS User Manual Download Page 4

Introduction

The IPP 144-40 GS is an industry-standard panel mounting printer
designed for outputting data, text and graphics. It is utilised in many fields
of application to give:

fault signals
machine / process status reports
test reports
production data / statistics

The thermal printing process requires no maintenance and uses
commercial documentgrade thermo paper. The 80 mm width provides the
optimum width-length ratio. This paper conforms to the PTB standards.

The printer prints max. 48 characters ( normal font) per line. At least 4600
lines can be printed on a paper roll.

The shelf-life of a printed document is 10 years when stored in an ambient
temperature of under 60 °C and a relative humidity of under 80 %.

Transmission is serial by means of an RS 232 (V24) or TTY (20 mA current
loop) interface. A  16 kByte data buffer allows rapid transmission.

To format the text, IPP 144-40 GS supports the most important control
characters of the siemens desktop printer PT88, e.g. bold, expanded.

A paper re-roll mechanism (optional) may be installed under the printer. A
plexiglass cover allows IP64 protection.

First steps

Supplied with the printer:

intruction manual, part no.: 27866  88139
mounting kit
adapter cable for connection compatibility with
Siemens desktop printer PT88, part no.: 27866 79461

2

Summary of Contents for IPP 144-40 GS









































Reviews:

No comments