
34
In the case of standard mode:
If d is outside the definable range, only paper feed is
executed, and subsequent data is processed as normal
data.
If the barcode width exceeds the print area of one line,
the barcode is not printed, and only paper feed is
executed.
Regardless of the amount of line feed specified by the
following commands, the paper is fed by the amount
equal to the barcode height (including HRI characters if
HRI character print is specified):
* (ESC 2:“ Sets initial line feed“)
* (ESC 3:“Sets line feed“)
Effective only if no data is contained in the print buffer. If
data is contained in print buffer, the data after m is
processed as normal data.
Moves the print position to the start of the next line after
barcode print is completed.
Has no effect on print modes (underline, character size)
excluding NORMAL.
In the case of JAN-8, after 8 bytes of barcode data are
entered, the barcode is printed, and subsequent data is
processed as normal data.
The number of data of an ITF barcode must be an even
number. If is an odd number, the last data is ignored.
After the number of input data reaches 255, the
processing of the command starts automatically.
In the case of GS k m n:
n denotes the number of data. n bytes of subsequent
data are processed as barcode data.
If n is outside the definable range, the processing of the
command stops, and the subsequent data is processed
as normal data.