GMR STENSBALLE/NESBO FF/LA, User Manual

Page: 15 / 36

GMR maskiner a/s Page 15
STENSBALLE / NESBO sweepers
User manual
GB
Basic settings
Top bar position
Pos. 1
Pos. 2
In order to lift the machine properly, the top bar must be fitted so that
the top bar eye on the tractor (pos.1) is mounted lower than the top bar
eye on the sweeper (pos. 2).
If this is not possible, you can order a special bracket to raise the top
point of the sweeper. The bracket can be ordered from your dealer.
NOTE
Risk of unnecessary wear
If the top bar is mounted differently than described,
the sweeper will tip forward when raised/lowered,
resulting in unnecessary wear on the PTO shaft.
Adjusting the top bar Adjust the top bar to achieve best sweeping results and minimum wear
on the brushes. The pivot joint between the mounting frame and main
beam must be positioned vertically in the working position. The pivot
joint moves when the sweeper is swung from one side to the other.
Setting up the machine