CBL-5464-0.M
TOOLS REQUIRED FOR ASSEMBLY
Socket set, Open end wrench set, Cordless drill with
3/8" socket bit (Magnetic recommended).
BEFORE ASSEMBLING THE WORKBENCH
Read through the assembly instructions to
familiarize yourself with the order in which the
parts are assembled. We suggest that you clear
& vacuum the area where the bench is to be
assembled. It is important that the bench is
assembled in the same sequence as instructed.
STEP 1
STEP 2
Attach the back brace to each
of the legs in 2 places. Bolts
should go thru the back brace
into the leg.
Use four 5/16 x 1" Hex Head
Bolts & four 5/16 Lock Nuts.
Attach the shelf to the back brace
in 3 places using #8 x 5/8 black
screws.
Attach the shelf to the legs using
two 5/16 x 3/4" Hex Head Bolts &
two 5/16 Lock Nuts per leg.
Bolts should go thru the shelf
into the leg.
Shelf to
Leg
Shelf to
Back Brace
