STEP 3
STEP 4
Locate a flat & clean surface to work
on. You may want to lay down a
blanket to avoid scratching the tops.
Connect the two halves of your
Maple top using (5) Draw Bolts.
Insert the Draw Bolts in the routered
slots as shown in Figure 1.
Make sure the 2 tops are even before
you fully tighten the bolts.
Figure 1
Figure 2
Attach 2 counter top mounting
brackets to the top of each leg.
Attach using three 5/16 x 4" Hex
Head Bolts with three 5/16 Lock Nuts
per leg.
STEP 5
Turn maple top over and center over base
assembly. 64” dimension of the top will run
the width of the work station. Fasten top to
base using the #14 x 1 lag screws.
