GMG 3394-ERT, Operator'S Manual

Page: 10 / 44

Section
3DJH
D]DUGV
'2127 exceed the maximum platform capacity. The weight of options and
accessories will reduce the rated platform capacity and must be factored into the
total platform load. Refer to the decals on the options.
'2127 elevate the platform when the machine is on a surface that is soft
and / or on a slope.
'2127
depend on the tilt alarm as a level indicator.
STOP if the tilt alarm sounds and the red light illuminates when the platform is
raised. Use extreme caution to lower the platform. Move the machine to a level
surface.
Driving: '2127 drive the machine on a slope that exceeds
the maximum uphill or downhill slope rating. Slope rating applies to machines in
the stowed position.
Driving in stowed position: use extreme care and reduce speed when driving
across uneven terrain, debris, unstable or slippery surfaces, and near holes or
drop-offs.
Driving with the platform elevated:
'2127
drive on or near uneven terrain,
unstable surfaces, curbs, drop-offs or other hazardous conditions.
'2127
push or pull toward any object outside the platform.
'2127 push the machine or other objects with the platform.
'2127
contact adjacent structures with the platform.
'2127 use the platform controls to free a platform that is caught, snagged or
otherwise prevented from normal motion by an adjacent structure. For outdoor
rated machines,
'2127 elevate the platform when wind speeds are in excess
12,5 m/s. If wind speeds exceed 12,5 m/s when the platform is elevated, carefully
lower the platform and discontinue operation.
'2127 increase the surface area of the platform (i.e. cover the rails with tarp or
plywood). Increased surface area exposed to the wind will decrease machine
stability.
'2127 attach overhanging loads or use the machine as a crane.
'2127 place loads outside the platform perimeter.
1(9(5 transport tools and materials unless they are firmly secured. Secure all
tools and loose materials.
1(9(5 alter or disable any machine components.
1(9(5 replace any part of the machine with items of different weight or
specification.
1(9(5 modify or alter the work platform without written permission from GMG.
1(9(5 place ladders or scaffolds in the platform or against any part of the
machine.
1(9(5 use the machine on a moving or mobile surface or vehicle.
Ensure that all tires are in good condition and lug nuts are properly torqued.
'2127 operate the machine with the chassis trays open.
'2127 alter or disable the limit switches or machine components that in any way
affect safety and stability.
'2127 replace items critical to machine stability with items of different weight or
specification. '2127 modify or alter this machine without prior written permission
from the manufacturer.
'2127 use batteries that weigh less than the original equipment 0LQLPXP weigh W
RIHDFK9EDWWHU\LV kg IRUDWRWDOPLQLPXPRINJ . The 9 batter \ must
weigh a minimum of kg.
0D[LPXP$OORZDEOH6LGH)RUFH
OEV1
13304
13306
13305
13307
13308
'212729(5/2$'
'2127'5,9(21,55(*8/$5
258167$%/(685)$&(
'2538//
2%-(&762876,'(3/$7)250
'2127(/(9$7(,1
:,1'<&21',7,216
'212786($6&5$1(
+D]DUGV
(576HULHV6FLVVRU/LIWV2SHUDWRU¶V0DQXDO