GME TX6600PRO Instruction Manual Download Page 57

Page: 57 / 94

TX6600PRO

INSTRUCTION MANUAL

To tag the channel, hold the

QUIET

PWR

key.

QT CH On

will be displayed

briefly and the

icon will appear to the right of the channel number.

To un-tag the channel, hold the

QUIET

PWR

key.

QT CH OFF

will be displayed

briefly and the

icon will disappear from the display.

ii.

To un-tag the channel, hold the

key. QT CH OFF will be displayed brieﬂy and the

icon will disappear from the display.

Channel is Tagged

Channel is Un-tagged

To activate the QUIET mode

Before activating the Quiet mode you must ﬁrst select a tagged channel.

Rotate the Channel knob or press the

keys to select a channel that has been tagged

for Quiet operation. The icon will be visible on that channel.

Brieﬂy press the

key. The icon will change to indicating the Quiet mode is now

active. All channels tagged for Quiet operation will now be operating in the Quiet Mode.

To de-activate the QUIET

mode

Select any channel

that has been tagged for

Quiet operation.

will be visible.

Brieﬂy press the

key. will change to and

all channels tagged for

Quiet operation will now be

open to all incoming signals.

Receiving signals in the QUIET mode

• If a signal is received on a QUIET channel, the channel will appear busy (the icon will be

visible) but no sound will be heard from the speaker.

• If a signal is received on an Open channel (one that is not tagged with ) the signal will be

heard in the usual way.

If a signal containing your SelCall Ident is received on any channel – Open or QUIET – the QUIET

mode will be cancelled, and the alarm will beep to alert you to the call. In addition, the caller’s

Ident or ALPHA Name will be displayed. All channels will now be open for normal transmission and

reception.

SCANNING IN THE QUIET MODE

Scanning while in the Quiet mode allows you to monitor a group of Quiet channels or a

combination of Quiet and Open channels.

To activate the QUIET mode

Before activating the QUIET mode you must first select a tagged channel.

Rotate the

Channel

knob or press the

keys to select a channel

that has been tagged for Quiet operation. The

icon will be visible

on that channel.

Briefly press the

QUIET

PWR

key. The

icon will change to

indicating the

QUIET mode is now active. All channels tagged for Quiet operation will
now be operating in the QUIET Mode.

To de-activate the QUIET mode

Select any channel that has been tagged for Quiet operation.

will

be visible.

Briefly press the

QUIET

PWR

key.

will change to

and all channels

tagged for Quiet operation will now be open to all incoming signals.

ii.

To un-tag the channel, hold the

key. QT CH OFF will be displayed brieﬂy and the

icon will disappear from the display.

Channel is Tagged

Channel is Un-tagged

To activate the QUIET mode

Before activating the Quiet mode you must ﬁrst select a tagged channel.

Rotate the Channel knob or press the

keys to select a channel that has been tagged

for Quiet operation. The icon will be visible on that channel.

Brieﬂy press the

key. The icon will change to indicating the Quiet mode is now

active. All channels tagged for Quiet operation will now be operating in the Quiet Mode.

To de-activate the QUIET

mode

Select any channel

that has been tagged for

Quiet operation.

will be visible.

Brieﬂy press the

key. will change to and

all channels tagged for

Quiet operation will now be

open to all incoming signals.

Receiving signals in the QUIET mode

• If a signal is received on a QUIET channel, the channel will appear busy (the icon will be

visible) but no sound will be heard from the speaker.

• If a signal is received on an Open channel (one that is not tagged with ) the signal will be

heard in the usual way.

If a signal containing your SelCall Ident is received on any channel – Open or QUIET – the QUIET

mode will be cancelled, and the alarm will beep to alert you to the call. In addition, the caller’s

Ident or ALPHA Name will be displayed. All channels will now be open for normal transmission and

reception.

SCANNING IN THE QUIET MODE

Scanning while in the Quiet mode allows you to monitor a group of Quiet channels or a

combination of Quiet and Open channels.

Receiving signals in the QUIET mode

•

If a signal is received on a QUIET channel, the channel will appear
busy (the

icon will be visible) but no sound will be heard from the

speaker.

Summary of Contents for TX6600PRO































































































Search results

Summary of Contents for TX6600PRO

Reviews:

Related manuals for TX6600PRO

Brands by name

Popular brands

GME TX6600PRO, Instruction Manual

Search results

Summary of Contents for TX6600PRO

Reviews:

Related manuals for TX6600PRO

Brands by name

Popular brands