t X 4 8 0 0
i n s t r u c t i o n m A n uA l
PA G E 5
Signal Meter
the tX4800 may be programmed to display the strength
of the incoming signal on the right of the lcD . if that
section of the display is already being used, the signal
strength may appear briefly when the signal is first
received, then will return to the previous display .
NOTE:
if required, the signal meter can be programmed
to be 'dB linear' . in this case, the display shows the signal
strength directly in dB .
PROGRAMMABLE FUNCTIONS
signal meter
Function
-
F1 F2 F3 F4 F5 F6 CALL
Disabled
Transmit Hi/Lo Power
Monitor
Squelch
Talk-Around
Scan
OS/GS Toggle
Page (Transpond)
Quiet
Recall CH M1
Recall CH M2
Recall CH M3
Recall CH M4
Speed Dial Selcall Memory
Recall CH M1 + Dial Selcall Mem.
Recall CH M2 + Dial Selcall Mem.
Recall CH M3 + Dial Selcall Mem.
Recall CH M4 + Dial Selcall Mem.
Speed Dial DTMF M1
Speed Dial DTMF M2
Speed Dial DTMF M3
Function
-
F1 F2 F3 F4 F5 F6 CALL
Speed Dial DTMF M4
Recall CH M1 + Dial DTMF M1
Recall CH M1 + Dial DTMF M2
Recall CH M1 + Dial DTMF M3
Recall CH M1 + Dial DTMF M4
Recall CH M2 + Dial DTMF M1
Recall CH M2 + Dial DTMF M2
Recall CH M2 + Dial DTMF M3
Recall CH M2 + Dial DTMF M4
Recall CH M3 + Dial DTMF M1
Recall CH M3 + Dial DTMF M2
Recall CH M3 + Dial DTMF M3
Recall CH M3 + Dial DTMF M4
Recall CH M4 + Dial DTMF M1
Recall CH M4 + Dial DTMF M2
Recall CH M4 + Dial DTMF M3
Recall CH M4 + Dial DTMF M4
Call
Monitor (Inverted)
Monitor (Toggle)
S-Meter (Toggle)
tick the boxes that match the function keys on the radio with the
specific feature programmed by the Dealer .
