background image

T X 3 5 5 0 S  

I N S T R U C T I O N   M A N UA L  

PA G E   5

User Selectable Wide/Narrow Band Filter:

 To accommodate the blending of 80 channel narrow band radios with 

older 40 channel wideband radios.

PRIVACY FUNCTIONS

 Voice Inversion Scrambler:

 

When activated, scrambles your voice so that communications are only intelligible to 

others using the same scrambler technology.

Inbuilt CTCSS & DCS:

 

User selectable Continuous Tone Coded Squelch System and Digital Coded Squelch system 

provides silent operation on individual channels.

In-Built SelCall with Quiet Mode:

 

Provides selective calling of individuals or groups with fully user-adjustable 

5-tone transmitted SelCall Ident. Also allows alphanumeric naming of up to 10 Idents for easier caller identification.

PHYSICAL PROPERTIES

Over Voltage Protection:

 Special overvoltage detection circuitry protects the radio and warns of excessive voltage 

conditions by flashing the display.

Rugged Construction: 

With Die-cast Chassis

USER CONTROLS AND INTERFACE

Full Spectrum Backlighting:

 

User adjustable, totally customisable backlight settings to match the vehicles 

dashboard lighting or drivers preference.

High Contrast Liquid Crystal Display:

 Fully detailed LCD provides a visual indication of the selected channel and 

all selected functions at a glance.

 

Front and Rear Microphone Inputs:

 Convenient front and rear microphone inputs to facilitate ease of installation 

and operation across a range of vehicles.

Digital Signal Strength Meter:

 Provides a numeric signal strength indication in numbers from 0 to 9+

Full Function LCD Controller Microphone:

 with rear mounted speaker using ‘Sound Path’™ technology to 

channel clear audio towards the user

.

A more detailed description of these key functions is included overleaf. These instructions describe the radio functions using the 
controller mic.        

Summary of Contents for TX3550S








































Reviews: