G X 8 0 0
i n s t r u c t i o n m a n ua l
1 1
3 press the
or
keys to select the value of the
flashing digit (0 – 9).
4. press the
key to confirm the selection and move
to the next digit.
5. repeat steps 3 & 4 to enter the entire 9 digit atis id.
6. when the last digit is entered you will be prompted
to enter the atis id again (this is to avoid entering an
invalid entry).
7. after entering the correct atis id for the second time,
the atis id will flash then the radio will revert to normal
operation.
note:
if the second atis entry doesn’t match the first, the
operation will be cancelled and you will need to start again.
ChaRging the BatteRy
the battery is a built-in design and is not user serviceable. if
the battery requires replacing, the radio should be returned
to GmE for service to ensure the waterproof integrity of the
radio is maintained.
to Charge the Battery
pull the connector cap on the top panel (between the Volume
control and the antenna) to expose the charging socket. plug
the supplied ac adaptor into the 240V power then connect
the adaptor’s charger plug into the socket on the top of
the radio.
while the charger is connected the display will show the
battery charging state by animating the battery icon.
iMPoRtant:
the connector used to charge the GX800 is a
mini usB type charging at 8V (instead of the customary 5V
normally associated with this connector).
For this reason,
• Do not connect your GX800 charger to other mini USB
devices as damage may occur to your device.
• Do not remove the warning label fitted to the charging
lead on the GX800 charger.
2. pluG suppliEd
ac charGEr
into socKEt
1. pull connEctor
cap awaY From
top panEl
liFt cap
