background image

 

www.gme.net.au

A Division of: 

Standard Communications Pty. Ltd

head Office: SYDNEY

- Locked Bag 2086, North Ryde NSW 1670, Australia. 

 

T: (02) 9844 6666  F: (02) 9844 6600.

MELBOuRNE 

7 Micro Circuit, Dandenong South, Vic 3165   T: (03) 9798 0988  F: (03) 9798 0177

ADELAIDE

 

14 Phillips St., Thebarton, SA 5031  T: (08) 8234 2633  F: (08) 8234 5138

PERTh

 

Unit 1, 10-12 Harvard Way, Canning Vale, WA 6155  T: (08) 9455 5744  F: (08) 9455 3110

BRISBANE 

Unit 1, 89-101 Factory Rd., Oxley, Qld 4075  T: (07) 3278 6444  F: (07) 3278 6555

SYDNEY 

Unit B, 22-24 College St., Gladesville, NSW 2111  T: (02) 9879 8888  F: (02) 9816 4722

AuCKLAND 

Unit 2/24 Bishop Dunn Pl., East Tamaki, Manukau NZ 2013 
T: (09) 274 0955  F: (09) 274 0959

For customers outside Australia and New Zealand, please contact your local GME retailer or 
email to: [email protected].

Part Number: 310434  Drawing Number: 44274-4

3. other Limitations

3.1   You may not rely on any 

representation, warranty or other 
provision by or for us which is not 
covered by clause [ 1 ] or repeated in 
this agreement in clear terms.

3.2   We are not liable (nor are our 

employees, contractors and 
agents) for any damage, economic 
loss or loss of profits whether 
direct, indirect, general, special or 

consequential - 

 

  (a)  arising out of any breach 
   

of any implied or express  

   

term, condition or  

   

warranty; or 

  (b)  suffered as a result of  
   

our negligence (or that    

   

of our employees,  

 

   

contractors or agents)  

   

- apart from liability as    

   

set out in the previous  

   

two clauses.

3.3   The liability of a party under this 

agreement (whether arising in 
contract, tort or by statute) is to be 
reduced by the same proportion as 
represents the proportion of the loss 
or damage caused or contributed to 
by the other party, its contractors 
or agents.

Summary of Contents for BX710

















Reviews: