wARRANTy
GmE limit this warranty to the original purchaser of
the equipment.
GmE warrant this product to be free from defects in material
and workmanship for a period of twelve (12) months from the
date of purchase from their authorised retailer.
should the product require servicing during this period, all
labour and parts used to effect repairs will be supplied free
of charge. GmE reserve the right to determine whether
damage has been occasioned by accident, misuse or
improper installation whereby the warranty would be
void, including:
Equipment which has been damaged due to:
(a) incorrect or reverse polarity connection to a battery or
power supply;
(b) connection to incorrect supply voltage.
(c) Effects of water or moisture penetration.
(d) non-factory modifications.
(e) use of incorrect replacement fuse.
Procedure to be followed by claimant: in the event of a
defect occurring during the twelve (12) month warranty
period, the original purchaser may return the defective unit
along with suitable proof of purchase date (i.e. receipt,
docket, credit card slip etc.) and a full description of the
defect to any authorised retailer.
All freight charges incurred for transportation by the retailer
or GmE are the purchaser’s responsibility.
the retailer will forward the unit to the closest authorised
GmE service Depot in your particular area.
GME AFTER SAlES SERviCE
Your GmE Gt9600 is especially designed for the
environment encountered in mobile or portable installations.
the use of all solid state circuitry, careful design and
rigorous testing, result in high reliability. should failure
occur however, GmE maintain a fully equipped service
facility and spare parts stock to meet the customer’s
requirements long after expiry of the warranty period.
pRECAUTiONS
never attempt to remove the receiver covers or undertake
repairs. should any maintenance be required it should only
be performed by a GmE approved service centre.
Do not connect or disconnect any cables without first
turning off the receiver’s Dc supply.
Do not expose the receiver to areas of extreme
temperature, high humidity, dust, steam, water, petroleum
products, smoke or direct sunlight.
use only GmE specified adaptors, power sources, amplifiers
or aerials.
never use thinners or other chemical reagents to clean the
receiver, should cleaning be necessary use only a soft cloth.
turn main power off and disconnect Dc supply when the
receiver is not being used for extended periods of time.
A Division of:
head office: sydney
- locked Bag 2086, north ryde n.s.W. 1670, Australia. tel: (02) 9844 6666, Fax: (02) 9844 6600.
melBourne
adelaide
perth
BrisBane
sydney
auckland
7 mircro circuit
14 Phillips st.
unit 1
unit 1
unit B
unit 2
Dandenong south
thebarton
10-12 Harvard Way
89-101 Factory rd.
22-24 college st.
24 Bishop Dunn Pl.
Vic. 3175
s.A. 5031
canning Vale
oxley
Gladesville
East tamaki
tel: (03) 9798 0988
tel: (08) 8234 2633
W.A. 6155
Qld. 4075
n.s.W. 2111
manukau, n.Z. 2013
Fax: (03) 9798 0177
Fax: (08) 8234 5138
tel: (08) 9455 5744
tel: (07) 3278 6444
tel: (02) 9879 8888
tel: (09) 274 0955
Fax: (08) 9455 3110
Fax: (07) 3278 6555
Fax: (02) 9816 4722
Fax: (09) 274 0959
For customers outside Australia and new Zealand, please contact your local GmE Distributor or email to: [email protected]
Part number: 310394 Drawing number: 4 3 7 5 8 - 3
www.gme.net.au
