19
Replace Desiccant Sachet
•
Remove the existing desiccant sachet
from the PCB exercising care not to
tear it (messy). Carefully remove any
remnants of the double-sided tape that
had previously retained the sachet in
place.
•
Remove the desiccant sachet from the
sealed bag in which it was provided
and carefully remove the cover strip
from the double-sided adhesive strip
on the back
•
Firmly press the desiccant against the
metal screening can, ensuring it
makes good contact and is securely
retained.
•
See video clip 05
•
IMMEDIATELY proceed without delay
to Chassis Assembly stage.
