25
Customer Support: 1-866-409-4581
Generator
Sediment cup cleaning
the sediment cup prevents dirt and water that may be in the fuel
tank from entering the carburetor.
refer to the Maintenance Schedule for regular service intervals.
1.
turn the generator off.
2.
have your generator on a flat, level surface.
3.
turn the fuel valve lever to the CloSed position.
4.
remove the sediment cup.
5.
Clean the cup and screen thoroughly with soap and water.
6.
use a clean cloth and wipe all pieces dry.
7.
reinstall the sediment cup, making sure the o-ring is in place.
8.
turn the fuel valve lever to the oPen position.
9.
Check for fuel leaks.
Spark plug Service
recommended spark plugs:
LD-F6TC
to ensure proper engine operation, spark plug must be properly
gapped and free of deposits. refer to the Maintenance Schedule
for regular service intervals.
1.
turn the generator off.
2.
have your generator on a flat, level surface.
3.
remove the spark plug cap. Clean any dirt or debris from
around the spark plug base.
4.
use a
13
⁄
16
" spark plug socket wrench to loosen and remove
the spark plug.
5.
inspect the spark plug. if the insulator is cracked or chipped,
discard plug and replace with a new spark plug. if the spark
plug is in good condition, clean the spark plug with a wire
brush.
6.
Measure the plug gap with a feeler gauge. the correct gap
should be 0.028 – 0.031 in. (0.70 – 0.80 mm). if the gap is
incorrect, be careful when bending the side electrode.
7.
Make sure the spark plug washer is in good condition.
8.
reinstall the spark plug by hand. this will prevent cross-
threading.
9.
after the spark plug is seated, tighten with spark plug wrench
to compress the washer.
n
when reinstalling a used spark plug, tighten
1
⁄
8
-
1
⁄
4
turn
after the spark plug seats in order to compress the
washer.
n
when installing a new spark plug, tighten
1
⁄
2
turn after
the spark plug seats in order to compress the washer.
Spark plug must be securely tightened.
An improperly tightened spark plug can become very
hot and could damage the engine.
Never use spark plugs that have an improper heat
range.
Use only recommended spark plugs or equivalent.
NOTICE
