background image

16

Safety or driver assistance features are no substitute for the driver’s responsibility to operate 

the vehicle in a safe manner. The driver should remain attentive to traffic, surroundings and 

road conditions at all times. Read your Owner’s Manual for important feature limitations and 

information. 

SAFETY ALERT SEAT

F

 – The driver’s seat pulses — left side, right side or simultaneously — 

to alert the driver of the  direction of potential hazards .

  Audible alerts or seat pulsing alerts may be selected . To change the alert settings, go to 

Settings > Vehicle > Collision/Detection Systems > Alert Type .

LANE CHANGE ALERT WITH SIDE BLIND ZONE ALERT

F

 

– While driving, the  system displays 

 warning symbol on the left or right side mirror when a vehicle is detected in that side 

blind zone area or rapidly approaching that area. The warning symbol flashes if a turn signal 

is activated when a vehicle has been detected on the same side .

  To turn on or off, go to Settings > Vehicle > Collision/Detection Systems > Lane Change 

Alert .

FORWARD COLLISION ALERT

– The   Vehicle Ahead Indicator is green when a vehicle is 

detected and is amber when following a vehicle ahead much too closely . When approaching 

a vehicle directly ahead too rapidly, a red alert flashes on the windshield and the Safety Alert 

Seat pulses or rapid beeps sound (if selected) .

  Press the 

 Collision Alert button on the steering wheel to set the alert timing to Far, 

Medium, or Near . This is also the Adaptive Cruise Control

F

 following gap setting .

FOLLOWING DISTANCE INDICATOR

F

 – The following distance to the vehicle ahead is 

indicated in seconds under the Info menu on the Driver Information Center . If no vehicle is 

detected ahead, dashes are displayed .

FORWARD AUTOMATIC BRAKING

F

 – In potential front-end imminent collision situations 

with detected vehicles, the brakes may be applied, if you haven’t already done so, to help 

reduce damage or avoid collisions at very low speeds with vehicles directly ahead . 

  To set Forward Automatic Braking and Forward Collision Alert to Alert and Brake, Alert, 

or Off, go to Settings > Vehicle > Collision/Detection Systems > Forward Collision System. 

LANE KEEP ASSIST WITH LANE DEPARTURE WARNING

F

 

– The system may help you avoid 

collisions due to unintentional lane departures . The 

 Lane Keep Assist  Indicator is green if 

the system is available to assist . If the vehicle approaches a detected lane marking without 

using a turn signal in that direction, the system may assist by  gently turning the steering 

wheel and displaying an amber 

  .

If active driver steering is not detected, the amber 

 may flash and the Safety Alert Seat 

may pulse or beeps may sound (if selected) on the side of the departure direction as the lane 

marking is crossed . The Lane Keep Assist system does not continuously steer the vehicle; the 

driver needs to steer and be in complete control of the vehicle .

  To turn on or off, press the 

 Lane Keep Assist button on the center  console .

FRONT PEDESTRIAN BRAKING

F

 

– During daytime driving, the system detects  pedestrians 

directly ahead up to a distance of approximately 131 ft . and displays an amber   indicator . 

When approaching a detected pedestrian too quickly, a red alert flashes on the windshield 

and the Safety Alert Seat pulses or rapid beeps sound (if selected) . The system may prepare 

the brakes or automatically brake the vehicle . 

  To set to Alert and Brake, Alert, or Off, go to Settings > Vehicle > Collision/Detection 

Systems > Front Pedestrian Detection .

F

 

Optional equipment

DRIVER ASSISTANCE SYSTEMS

Summary of Contents for TERRAIN 2019





















Reviews: