background image

Safety rules for laser line generators 

The laser line generator is Class 2 with maximum 1mW and 

400nm – 650nm wavelengths. These lasers do not normally 

present an optical hazard, although staring at the beam 

may cause flash blindness. 

WARNING.

 Do not stare directly at the laser beam. 

A hazard may exist if you deliberately stare into the beam, 

please observe all safety rules as follows; 

• 

The laser shall be used and maintained in accordance with 

the manufacturer’s instructions. 

• 

Never aim the beam at any person or an object other than 

the work piece. 

• 

The laser beam shall not be deliberately aimed at 

personnel and shall be prevented from being directed 

towards the eye of a person for longer than 0.25s. 

• 

Always ensure the laser beam is aimed at a sturdy work 

piece without reflective surfaces. i.e. wood or rough 

coated surfaces are acceptable. Bright shiny reflective 

sheet steel or the like is not suitable for laser use as 

the reflective surface could direct the beam back at the 

operator. 

• 

Do not change the laser light assembly with a 

different type. Repairs must be carried out by the laser 

manufacturer or an authorized agent. 

CAUTION.

 Use of controls, adjustments 

or performance of procedures other than 

those specified herein may result in 

hazardous radiation exposure. 
Please refer to the relevant Australian 

standards, AS 2397 and AS/NZS2211 

for more information on Lasers. 

Additional safety rules for laser 

line generator

The laser line generator emits a laser fan beam, which acts 

like an invisible surface in the actual three dimensions 

space. When used indoors, it generates a visible laser line 

on the surfaces the laser fan beam crosses. 
The liner is a Class 2 laser tool and is manufactured to 

Australian standards, AS 2397 and AS/NZS2211.
The two vials on the top of the laser line generator are 

for the laser fan beam alignment reference only. The unit 

is not a level and can not be used as a level. The laser 

line generator is not designed as a height measuring 

instrument and must not be used as such. It is designed 

to be referred to its projected line only.

WARNING.

 Read and understand all instructions. Failure 

to follow all instructions may result in hazardous radiation 

exposure, electric shock, fire and/or bodily injury.

  Do not remove or deface any labels. Removing labels 

increases the risk of exposure to laser radiation.

  Do not stare directly at the laser beam as serious eye 

injury could result.

  Do not project the laser beam directly into the eyes of 

others. 

  Do not place the laser in a position which may cause 

anyone to stare into the laser beam intentionally or 

unintentionally. 

  Do not use optical tools such as a telescope or transit 

to view the laser beam.

  Do not operate the laser line generator around children 

or allow children to operate the tool.

  Keep children and bystanders away while operating the 

laser line generator.

  Turn the laser line generator off when it is not in use. 

Leaving the laser on increases the risk of staring into 

the laser beam.

  Do not operate the laser line generator in explosive 

4

LASER RADIATION

IS EMITTED THROUGH 

THIS APERTURE

LSLINE Deluxe Laser

Line Generator

Made in China

N380

LASER LIGHT LASER RADIATION

Do not stare into beam. 

Class 2 laser product.

Summary of Contents for LS LINE/REDEYE











Reviews: