Resetting the Short Circuit, Overload
or Ground Fault Detection (GFD) Circuit
To reset the Short Circuit, Overload or Ground
Fault Detection (GFD) Circuit while operating
in both the normal and continuous modes, ensure
any observed fault is removed, and press the
APO button. The light next to the button will
illuminate indicating that the system is supplying
120-volt AC power to the outlets. In the case of an
engine shutdown due to a ground fault while in
the continuous mode, restart the engine by turning
the key from LOCK to START, then follow the
instructions for entering APO Continuous Mode
earlier in this section.
Starting and Operating Your
Vehicle
Starting Your Vehicle
{
CAUTION:
There is something about your vehicle
that can make it move suddenly, and you
or others can be seriously injured. This
can happen if the vehicle is in the Auto
Stop mode, and the shift lever is in
DRIVE (D). Because your vehicle has the
Automatic Engine Start/Stop feature, your
vehicle’s engine might seem to be shut off
when you come to a complete stop.
CAUTION:
(Continued)
18
Summary of Contents for Hybrid 2007
