3
Symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Conforms to relevant standards for
electromagnetic compatibility.
Double insulated for additional protection.
Specifications
Voltage: 230–240Vac ~ 50Hz
Input power: 2200W
No load speed: 3750min
-1
Disc diameter: 355mm
Flange diameter: 120mm
Disc bore size: 25.4mm
Pipe: 100mm*
Box Section: 90mm square*
Rectangular Steel Tubing: 60 x 200mm*
Angle Iron: 130mm*
Solid Steel Bar: 35mm*
Insulation: Double insulated
* Cutting capacities are based on using a full size 355mm
cutting disc that is not worn. As the disc wears the
cutting capacity will reduce.
Dear Customer
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or 0800 445 721 in
New Zealand.
Introduction
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
CAUTION.
Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.
