Operation
1.
Turn radio “ON”
2.
Press “
BAND
” or
“XM
” button until XM1 or XM2 is displayed
3.
Connect audio device to 3.5mm jack using included 3 ft. audio cable or
similar (See
Fig. 7
)
4.
Put audio device in play mode and enjoy.
Fig. 7
Male-male audio cable
5.
Use radio volume control button to set playback level. If distortion is heard
lower volume on audio device.
Warning: Playlist and Track selection is *NOT* possible from the Radio.
You must use the audio devices built-in controls to access audio files
.
6.
To listen to XM simply disconnect 3.5mm audio plug from jack and operate
XM as customary
7.
If correct operation is confirmed go ahead and reinstall Panels surrounding
the XM tuner.
Alert:
When listening to XM audio jack must be empty (no connection)
otherwise unwanted noises will be present.
Frequent ask questions & troubleshooting
1.
Does the AUX-GM4X work on all LAN radios?
YES;
so long vehicle has an
XM module
. (See
Fig. 1
)
2.
Does this cable work if vehicle does not have XM Tuner?
NO.
XM Tuner required for this cable to work as described
3.
The aux jack on my radio is broken. Will the AUX-GM4X work?
The AUX-GM4X is independent of radio aux jack. If aux jack is broken, the
AUX-GM4 is a great alternative; however, your vehicle must have an XM
Tuner module with or without subscription. Subscription is retained (Select
subscribed at checkout)
4.
What is the difference between subscribed and not subscribed?
If subscription has expired with
no intentions to renew
, purchase “Not
subscribed”, otherwise purchase “Subscribed”
Important:
Not subscribed cable does
not allow
XM playback at any time,
therefore to retain XM playback (now or in the future), purchase
“Subscribed” version.
5.
I don’t know if vehicle has required XM module. How can I find out
without ripping the car apart?
Turn radio “ON”, press “BAND” or “XM” button repeatedly to cycle through
AM/FM/XM1/XM2
. If only AM/FM is displayed, vehicle does not have an
XM Tuner and is not compatible with this part.
6.
Does this cable also work if nothing’s wrong with radio aux jack?
YES,
this cable works regardless of aux jack status. With the AUX-GM4X and
radio “AUX” it is possible to have two auxiliary inputs working independent
of each other. Vehicle must have XM Tuner module (with or without
subscription) for the AUX-GM4X to work.
*Warning: Not applicable to 2007 Silverado Classic. These requires our
© 1995-Aug-22 Discount Car Stereo, Inc. All rights reserved. Information in this document is
subject to change without notice. Other products and companies referred to herein are
trademarks or registered trademarks of their respective companies or mark holders.
