Black plate (4,1)
Acadia/Acadia Denali Owner Manual - 2013 - crc2 - 12/11/12
6-4
Lighting
Turn and Lane-Change
Signals
Move the turn signal lever all the
way up or down to signal a turn.
An arrow on the instrument cluster
flashes in the direction of the turn or
lane change.
Raise or lower the lever until the
arrow starts to flash to signal a lane
change. Hold it there until the lane
change is completed. If the lever is
briefly pressed and released, the
turn signal flashes three times.
The lever returns to its starting
position whenever it is released.
If after signaling a turn or lane
change the arrow flashes rapidly or
does not come on, a signal bulb
may be burned out.
Have any burned out bulbs
replaced. If a bulb is not burned out,
check the fuse. See
Fuses and
Circuit Breakers on page 10
‑
28
.
Turn Signal On Chime
If either one of the turn signals is left
on and the vehicle has been driven
more than 1.2 km (0.75 mi), a chime
will sound.
Fog Lamps
Use the fog lamps for better vision
in foggy or misty conditions.
The fog lamp button is on the
exterior lamp control to the left of
the steering column.
#
(Fog Lamps):
Press this button
to turn the fog lamps on or off.
A light comes on in the instrument
cluster when the fog lamps are in
use. The ignition must be on for the
fog lamps to work.
When the headlamps are changed
to high beam, the fog lamps turn off.
The fog lamps come back on again
when the high-beam headlamps are
turned off.
Some localities have laws that
require the headlamps to be on
along with the fog lamps.
Summary of Contents for 2013 Acadia
Page 6: ...Black plate 6 1 Acadia Acadia Denali Owner Manual 2013 crc2 12 11 12 vi Introduction 2 NOTES...
Page 30: ...Black plate 24 1 Acadia Acadia Denali Owner Manual 2013 crc2 12 11 12 1 24 In Brief 2 NOTES...
Page 114: ...Black plate 6 1 Acadia Acadia Denali Owner Manual 2013 crc2 12 11 12 4 6 Storage 2 NOTES...