18. Return the equipment to its original storage location
in your vehicle.
19. Immediately drive the vehicle 5 miles (8 km) to
distribute the sealant evenly in the tire.
20. Stop at a safe location and check the tire pressure,
refer to Steps 1 through 11 under “Using the Tire
Sealant and Compressor Kit without Sealant
to Inflate an UnderInflated Tire (Not Punctured)”
later in this section.
If the tire pressure has fallen more then 10 psi
(68 kPa), below the recommended inflation pressure,
stop driving the vehicle. The tire is too severely
damaged and the tire sealant and compressor kit
cannot seal the tire. See “Roadside Assistance
Program” in the owner manual.
If the tire pressure has not dropped more than 10 psi
(68 kPa) from the recommended inflation pressure,
inflate the tire back up to the recommended inflation
pressure.
21. Wipe off any sealant from the wheel, tire, and
vehicle.
22. Dispose of the sealant canister (B) and sealant air
hose (G) at a local dealer/retailer or in accordance
with your local state codes and practices.
23. After temporarily sealing a tire with the tire sealant
and compressor kit, take your vehicle to an
authorized dealer/retailer to have the tire repaired
or replaced.
5-37
Summary of Contents for 2008 Chevrolet Tahoe
Page 8: ...NOTES 1 4...
Page 32: ...NOTES 3 14...
Page 36: ...NOTES 4 4...
Page 40: ...Engine Compartment Overview When you open the hood on your vehicle you will see 5 4...