11
Program HomeLink
1. Determine which of the three chan-
Adjustable Pedals
(if equipped)
The buttons used to
adjust the pedals are
located on the driver’s
side door panel.
• Press the button
closest to you to
move the pedals closer to your body.
• Press the button farthest from you to
move the pedals away from your
body.
The vehicle must be in Park (P) for this
feature to operate.
See Section 2 of your Owner Manual.
Cruise Control (if equipped)
Cruise control allows you to maintain a
constant speed of 25 mph or more with-
out keeping your foot on the accelerator
pedal.
Setting Cruise Control:
1. Move the cruise control switch to on
( )
.
2. Attain the speed you want to
cruise at.
3. Press in the Set button
(
)
at
the end of the multifunction lever on
the left side of the steering column.
4. Take your foot off the accelerator
pedal.
5. The cruise symbol on the instrument
cluster will illuminate.
There are two ways to increase speed
while cruising:
• Use the accelerator pedal to get to a
higher speed. Press at the end of
the multifunction lever to set the
cruising speed. Release the accelera-
tor pedal.
• Press the resume/accelerate switch
(
+
) to get to a higher speed, and then
release the switch.
To reduce speed while cruising:
• Press and hold at the end of the
multifunction lever until you reach the
desired lower speed, and then
release it.
See Section 3 of your Owner Manual.
Summary of Contents for 2005 Yukon Denali
Page 19: ...19 Notes...
