manualshive.com logo in svg

GMC 2002 Savana, Owner'S Manual

Share
Download
GMC 2002 Savana Owner'S Manual Download Page 238

5-7

7. Don’t let the other end

touch metal. Connect it
to the positive (+)
terminal of the good
battery. Use a remote
positive (+) terminal if
the vehicle has one.

8. Now connect the black

negative (

-

) cable to the

negative (

-

) terminal of

the good battery. Use a
remote negative (

-

)

terminal if the vehicle
has one.

Don’t let the other end touch anything until the next
step. The other end of the negative (

-

) cable doesn’t

go to the dead battery. It goes to a heavy, unpainted
metal engine part or to a remote negative (

-

) terminal

on the vehicle with the dead battery.

Summary of Contents for 2002 Savana




























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands