GMC 2002 Savana Owner'S Manual Download Page 174

Page: 174 / 411

3-35

Compact Disc Messages

If the disc comes out, it could be for one of the
following reasons:
D If you’re driving on a very rough road. When the

road becomes smooth the disc should play.

D If it’s very hot. When the temperature returns to

normal, the disc should play.

D The disc is upside down.
D It is dirty, scratched or wet.
D The air is very humid. (If so, wait about an hour

and try again.)

D If the CD is not playing correctly, for any other

reason, try a known good CD.

If any error occurs repeatedly or if an error can’t be
corrected, contact your dealer.

AM-FM Stereo with Six-Disc Compact
Disc Player with Programmable
Equalization and Radio Data System (RDS)
(If Equipped)

Playing the Radio

PWR (Power): Push this knob to turn the system on
and off.

VOLUME: Turn the knob clockwise to increase
volume. Turn it counterclockwise to decrease volume.

Summary of Contents for 2002 Savana



























































































































































































































































































































































































































Search results

Summary of Contents for 2002 Savana

Reviews:

GMC 2002 Savana, Owner'S Manual, Page: 174 / 411

Search results

Summary of Contents for 2002 Savana

Reviews: