manualshive.com logo in svg

Gmate VOICE, User Manual, Page: 59 / 61

Share
Download
Gmate VOICE User Manual Download Page 59

21

SETTING THE METER  

Call Customer Service Toll Free at

 

855-GO-GMATE (855-464-6283)

 / 24 hours a day, 7 days a week.

www.Gmate.com

Note: When you test your blood glucose after the Timer is set to “On”, 
the Timer will ring after the selected hour and minute you have selected.

STEP 4

To turn the timer “On” or “OFF”, use the left or right button to make your 

selection then quickly press and release both left and right buttons together. 

STEP 5

If “OFF” is selected, you can quickly press and release both the left and right 

buttons together to exit the Timer setting. If “On” is selected, to set your timer, 

use the left or right button to adjust the hour. The right button will increase the 

number and the left button will decrease the number. Once the desired hour 

has been selected, quickly press and release both left and right buttons 

together to confirm your entry and advance to the minutes setting.

STEP 6

The minutes will be flashing. Use the left or right button to adjust the minutes. 

Once the desired minutes are selected, quickly press and release both left 

and right buttons together to confirm your entry. 

STEP 7

You have now completed the Timer setting. To exit the Timer at any time, 

press both the left and right buttons together for 2 seconds. 

Summary of Contents for VOICE






























































Reviews:

No comments