SERVICE
In addition to the already described service work should always try to keep your vehicle in order to prevent wear. If there
is dirt in moving parts, this can affect the performance of the model signi
fi
cantly. Remove dirt or dust with compressed
air, a soft brush and / or with a toothbrush. If possible, try using no solvents, as this can move the dirt in normally inac-
cessible places and thus cause additional wear. We recommend the following simple procedures:
Remove dirt and dust as far as possible with the methods described above.
•
Check the car for worn, broken or gripping parts and repair them if necessary.
•
Check regularly the
fi
xed seating all screws and tighten them if necessary.
•
SERVICE AND REPAIR, SPARE PARTS
For the Punisher all parts are available as spare parts. So if a part is defective or worn, you can identify these parts with
the Exploded view, buy these parts and
fi
x the car yourself with the help of the assembly instruction (pages 37 - 39).
In problem cases, or for questions and repairs, please contact the Service department in your country (see
warranty card on page 43) or:
GRAUPNER-Service, Henriettenstrasse 94-96, D-73230 Kirchheim/Teck,
Tel. +49/1805/472876
SPARE PARTS:
at your local hobby shop or online at Graupner spare-parts Shop http://www.graupner-ersatzteilshop.
de/ under order.-no. 90140.RTR
Scale:
1:10
Lenght:
450 mm
Width:
268 mm
Height:
148 mm
Wheelbase:
320 mm
Wheel diameter:
130 mm
Gear ratio:
1:38.6
Motor:
2x RC390 brushed
Radio System:
GM-Racing 3TD 27Mhz FM
Speci
fi
cations Punisher:
Speci
fi
cations ESC:
Number of cells NiMH
5 - 7 (6.0 - 8.4 V)
Number of cells LiPo
2 (7.4 V)
Constant current forward
150 A (300 A ~ 5 sec.)
Constant current reverse
100 A (200 A ~ 5 sec.)
BEC
5.0V/2A (4A/5 sec.)
Dimensions
ca. 39x28x30 mm (w/o wiring)
Receiver connector
Graupner/JR
GM-Racing 90140.RTR PUNISHER Crawler 18
Summary of Contents for Punisher Rock Crawler
Page 24: ...90140 RTR 43 GM Racing 90140 RTR PUNISHER Crawler ...
Page 28: ......
