GLX POWER LED 47
DUAL FOCUS
MANUAL
2
Thanks for choosing the GLX POWER LED 47 DUAL FOCUS lighting system. In order to make the
best use of your LED SYSTEM, please read the following carefully.
Important notes
1
Read these instructions.
2
Keep these instructions.
3
Do not use the POWER LED 47 DUAL FOCUS near water.
4
Clean only with dry cloth.
5
Install in accordance with the manufacturer’s instructions.
6
Do not block any ventilation openings.
7
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
8
Protect the power cord from being walked on or being pinched.
9
Unplug this apparatus when unused for long periods of time.
There are no user serviceable parts inside. All servicing has to be done by qualified service personnel.
Servicing is required when the POWER LED 47 DUAL FOCUS has been damaged in any way, such
as when the power supply cord or plug is damaged, when objects have fallen onto the GLS-47, when
it has been exposed to rain or moisture, or when the GLS-47 does not operate normally.
Warning: damages caused by the disregard of this user manual are not subject to warranty.
Installation of the GLX POWER LED 47 DUAL FOCUS
Attach the LED BAR to the top end of a 35mm diameter stand and fasten the fixation screw making
sure the unit’s weight is evenly balanced. Please note: for overhead rigging in public or industrial
areas, a series of safety instructions have to be followed that this manual can only give in part.
Main connection
The device must only be connected in compliance with the IEC standards. The electric installation
must be equipped with a Residual Current Device (RCD) with a maximum fault current of 30mA.
Lighting effects must never be connected to dimming packs.
Operation
After you power up the GLS-47, the LED’s start running and the display lights up. The device has two
operating modes; it can be operated in sound controlled or in DMX¬ controlled mode.
You can choose the desired mode via the button
MENU
,
UP
and
DOWN
:
When the display shows
A***
you can choose the desired DMX address via the UP or DOWN buttons.
When the display shows
*512
the device is in DMX mode. To switch to sound controlled mode, press
the DOWN button.
When the display shows
*SND
the device is in sound controlled mode. To switch to DMX mode, press
the UP button.
When the display shows
S**
you can choose the desired speed of the internal programs. Default is 51;
for increasing speed press the DOWN button, for decreasing speed press the UP button.
DMX controlled operation
You can control the spots individually via your DMX controller. The GLS-47 occupies 15 channels.
DMX¬512 connection
Only use a stereo shielded cable with 3¬pin XLR connectors in order to connect the controller with the
fixture or one fixture with another.
Dual Focus
The GLS-47 has an evenly spread beam angle of 40º. The center lens has a beam angle of 20º for a
much brighter center focus.
TCL
Tri-color lens technology holds a red, green and blue LED for an unlimited color palette and seamless
color mixing
