18
When the cylinder is correctly positioned, the disengaged lever handle is mechanically coupled when a me-
chanical stop is reached by turning the key in the opening direction. Never actuate the lever handle and
never extend the bolt when the Allen key is inserted.
5. Installation of the security plate / split square spindle
The HZ-lock VB 19000 together with the Glutz RR ES-2 and ES-3 security plates and the matching split
square spindle has been tested as an emergency exit lock in accordance with EN 179. A stable, fixed mobile
fastening of the two lever handles on the plates is important (twin glide easyfix®). The split square spindle
does not support the fitting and cannot be subjected to tensile forces. Make sure that the shaft locking device
is pressed exactly in the ring groove provided for this purpose. With the use of roses, the stress on the follo-
wer parts would be excessive, wherein anti-burglary resistance is not guaranteed. In this case, we make no
guarantee for the lock with an unsuitable lever handle bearing.
Use of a suitable site fixing template to drill the holes for the screw connection of the in-
side and outside plate is recommended. The site fixing template is positioned on the lever
handle and the cylinder cutout. Drill from both sides, remove the lock, drill the door leaf
from both sides, and pay attention to the electrical supply cable below! Clean the lock
pockets and re-install the lock.
Prepare the screws for the correct length. Neither the square spindle nor the cylinder may be canted in the
lock when the screws are tightened. In the process, the door leaf may not be pulled together; spacer sleeves
must be provided if necessary. After actuation, the lever handle must be automatically held in its top-most
horizontal position by the integrated handle holding springs only.
6. Instructions for the user and recommendations for maintenance
The door element must be handed over to the building owner with the completely filled
in acceptance report. The building owner must be instructed in the functions and the ac-
companying instructions must be handed over to them with written recommendations
and instructions for maintenance.
The accompanying self-adhesive sticker providing instruction for opening with the key
must be affixed on the outside of the door until the instruction has been followed!
