Problems with the finishing unit
Indicator status and error codes
The finishing unit's status indicator lamp has several ways to indicate the current
status of the unit and/or unit errors.
GREEN - STEADY
Finishing unit is ready.
Program selector may be changed before plate is placed
on conveyor.
GREEN - FLASHES
Finishing unit is ready for plates using the selected
program.
Program selector must not be changed.
RED - 1 FLASH
BUZZER SOUNDS
Unit is not ready because oven sensor is covered
without conveyor sensor being activated first.
Remove plate and place it properly above conveyor
sensor.
RED - 3 FLASHES
BUZZER SOUNDS
Bulb error - one or more bulbs in the oven are blown.
Power the unit off, replace bulb, then power the unit on
again.
RED - 4 FLASHES
BUZZER SOUNDS
Motor regulation error - motor/conveyor is blocked.
Power the unit off, remove obstacle, then power the
unit on again.
Operating Manual - PlateWriter 8000/NewsWriter XL
1237
Troubleshooting
5-2
Problems with the finishing unit