background image

8

48010 - 03/16

A. Menarini Diagnostics S.r.l.

Via Sette Santi, 3

50131 Firenze - Italia

XX

Distributed by:

XXXXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXX

XXXXXXXXXXXXXXX

XXXXXXXXXXXXXXX

XXXXXXXXXXXXXXX

XXXXXXXXXXXXXXX

XXXXXXXXXXXXXXX

Date of issue: October 2015

GlucoMen® areo 2K

Made in Taiwan

GlucoMen® areo Sensor, GlucoMen® areo β-Ketone Sensor,  

GlucoMen® areo Control and GlucoMen® areo Ket Control

See relevant instructions for use

12. Symbols and abbreviations

Consult instructions for use

Caution, consult instructions for use

Temperature limitation

Use by

Manufacturer

Batch code

In vitro diagnostic medical device

In vitro device for self-testing

Serial number

Recyclable package

CE marking

Contamination risk due to the use of blood samples

Blood glucose meter

Significant  additions  or  changes  from  previous  user 

manual revision

Direct current (voltage)

Catalogue number

The  meter  complies  with  the  requirements  of  directive  2011/65/EU  on 

the restriction of use of certain hazardous substances in electrical and 

electronic equipment and with the requirements of directive 98/79/EC on 

in vitro diagnostic medical devices.

11. Warranty

Your GlucoMen® areo 2K meter is guaranteed to be free of material and 

workmanship  defects  for  2  years  from  the  date  of  purchase  (except  as 

noted below). If at any time during the first 2 years after purchase, your 

GlucoMen® areo 2K meter does not work for any reason (other than as 

described below), it will be replaced with a new meter, or a substantial 

equivalent, free of charge. Should you wish to extend the warranty period 

for your meter, please refer to the warranty card.
This warranty is subject to the following exceptions and limitations:

 this warranty is only applicable to the original purchaser;

 this warranty does not apply to units which malfunction or are damaged 

due  to  obvious  tampering,  misuse,  alteration,  neglect,  unauthorized 

maintenance  or  failure  to  operate  meter  in  accordance  with  the 

Instructions;

 there  is  no  other  express  warranty  for  this  product.  The  option  of 

replacement, described above, is the warrantor’s only obligation under 

this warranty.

The original purchaser must contact A. Menarini Diagnostics: Telephone 

Number XXXXXXXX.

A. Menarini Diagnostics is committed to using your personal information 

responsibly and in compliance with the law. You have our pledge that we 

will not disclose or sell your personal information with third-parties.

The information you voluntarily provide will be used to help us serve you 

better in the future.

Summary of Contents for Areo 2k









Reviews: