GLP
German Light Production
(V1.25)
15
3.9.5 Display
(DISP)
DISP
Use this function to choose between different display indications. Use the
Up/Down-
keys to select desired function and press
Enter
to confirm or
Mode
to cancel and return to the menu.
D ON
Display On/Off (If you've chosen
off
, the display will go out within
15 seconds after the last input. The next key touch will reactivate
the display).
REV
Turn around the display
3.9.6 Fixture Temperature
(TEMP)
TEMP
This function allows you to read out the actual temperature of the
Y
Y
P
P
O
O
C
C
5
5
7
7
5
5
. Press
Enter
to confirm or
Mode
to cancel. Inside temperatures below
80°C are not critical. 80°C and more lead the lamp being switched off at a
critical point. Please note for a save operation that the outside temperature
should not exceed 45°C.
3.9.7 Fan Control
(FANS)
FANS
By using this function you can choose between 4 types of fan speed
operations. Use the
Up/Down-
keys to select desired function and press
Enter
to confirm or
Mode
to cancel and return to the menu.
HIGH
The cooling fan works continuously at max. speed.
REG
The fan automatically raises its speed in order to control inside
temperature of the fixture.
LOOF
The fan keeps the adjusted low speed until the temperature
exceeds max. inside temperature, then the
Y
Y
P
P
O
O
C
C
5
5
7
7
5
5
automatic-
ally
switch off
the lamp.
LOHI
The fan keeps the adjusted low speed until the temperature
exceeds max. inside temperature, then the
Y
Y
P
P
O
O
C
C
5
5
7
7
5
5
automatic-
ally switch from low to high fan speed.
In addition to these settings, you can set to fan speed to minimum via DMX
(Special channel 13, value 224..229). This will last until a temperature of
90° is reached.
