GLP German Light Products
X4 Atom PSU12 manual (v1.0)
from software version: v1.21
20
7
Maintaining and Cleaning
The
X4 ATOM PSU 12
is a fixture of very low maintenance. It is only necessary to
clean the air inlets and outlets from time to time. For safe operation it is
absolutely essential that the fixture is kept clean and that dust, dirt and smoke-
fluid residues must not build up on, or within the fixture. Otherwise the fixture's
cooling will be significantly reduced or damages can occur. Regular cleaning
will not only ensure the maximum performance, but will also allow the fixture to
operate reliably throughout its life.
7.1
Safety regulations
•
Pull out the mains power plug!
•
Wait min. 15 minutes after disconnecting power to allow the fixture to
cool down.
7.2
Maintenance and Interval (rule-of-thumb)
The contamination of the fixture depends on the environment details. Hence
no general guidelines can be given. The intervals given below are only
suggestions from our experience.
Position
Interval
In this way
Fan and air channel
monthly
vacuum cleaner, airbrush,
etc.