German Light Products®
impression® FR1 TM User Manual
31
To remove the micro-Fresnel lens:
Shut down power to the luminaire and allow it to cool.
Figure 11. Removing a micro-Fresnel lens
See Figure 11. Remove the three Phillips #1 screws (arrowed) from the lens in the
front of the head.
Tilt the head downwards and allow the lens
A
and frost
filter
B
to slide out of the head. Store the lens for possible
re-use.
Reinstall the frost filter in the head by passing the three
screws through the notches in the filter and tightening
them into their holes in the head.
If you reinstall the micro-Fresnel lens later, use the three
Phillips screws to fasten it into its original position over the
frost filter. See Figure 12. The smooth side of the lens must
face inwards and the ridges must face out of the head.
Figure 12. Lens
orientation
Summary of Contents for impression FR1 TM
Page 1: ...User Manual Luminaire software version 1 20...
Page 36: ......
