Glowworm EASICOM 3 25s, Installation And Maintenance Instructions Manual

Page: 34 / 52

34
Installation and maintenance instructions EASICOM 3 0020238426_04
13.6.3 Replacing the gas valve assembly
1. Disconnect the product from the power grid.
2. Close the gas stopcock.
3. Remove the front casing. (
→
Page 15)
B
D
E
A
C
5
6
7
3
2
1
4
4. Remove the air intake pipe (2) .
5. Remove the plug from the gas valve assembly (3) and
from the fan (4) .
6. Unscrew the gas connection pipe's connection (1) from
the gas valve assembly.
7. Undo the two screws (5) .
8. Remove the gas valve assembly (3) .
9. Remove the seal (6) if it is still in place on the fan (7) .
10. Install the new gas valve assembly in reverse order.
11. Check the CO
₂
content. (
→
Page 30)
12. Set the CO
₂
content. (
→
Page 30)
13.6.4 Replacing the heat exchanger
1. Remove the front casing. (
→
Page 15)
2. Remove the gas-air mixture unit. (
→
Page 30)
1
A
B
3. Remove the gas pipe (1) .
1
2
3
5 4
A
B
4. Remove the temperature sensor (3) .
5. Remove the upper clip (1) .
6. Remove the lower clip (4) .
7. Remove the supply pipe (5) .
2
2 3
B
1
A
8. Remove the upper clip (1) .
9. Remove the lower clip (3) .
10. Remove the return pipe (2) .
1
A
2
3
4
11. Remove the clip underneath the condensate tray (1) .
12. Undo the four screws (2) .