GLOW T-150, Installation & Operation Manual

Page: 11 / 88

Glow T150 & T180
Tankless Condensing Water Heater
11
1.4 Product Conformity
All
Glow
Tankless Water Heaters are
ETL certified and possess technical
and functional characteristics that
comply with the following standards:
American National Standard/CSA
Standard for Gas Water Heaters
Volume III, Storage Water Heaters
with input Ratings above 75,000
Btu per Hour, Circulating and
Instantaneous. Conforms to ANSI
STD Z21.10.3:2019, certified to CSA
STD 4.3-2019.
The materials used, such as copper,
brass, stainless steel, etc. form a
compact, homogeneous, highly
functional unit that is easy to install
and simple to operate. In its simplicity,
the wall-mounted appliance is
equipped with all the appropriate
accessories required to make it
a fully independent water heater
capable of satisfying domestic hot
water production and central heating
(maximum set point of 63
°
C/145
°
F)
needs if installed. All water heaters
are fully inspected. This manual must
be kept in a safe place and must
accompany the water heater at all
times.
Glow Brand
will not be held
responsible for any misinterpretation
of this manual.
Glow Brand
will not be held
responsible for the consequences
in the case of non-observance of
the instructions contained in this
manual or in the case where actions
not specifically described herein are
undertaken.
MENU
ENTER
RESET
UP
DOWN
Figure 1.1 - Glow Tankless Water Heater