Glow-worm Climapro 2 RF, Installation Instruction, Page: 6 / 16

0020094581_01 - 08/10 - Glow-worm
- 4 -
INSTALLATION
INSTALLATION
5 Installation location
• Explain the following requirements to the user.
Install Climapro
2
Rf:
- in a room protected from frost,
- on an interior wall of the main room in the home,
- at approximately 1.50 metres from the floor (according to the
regulations in force).
Do not install Climapro
2
Rf:
- near sources of heat, such as radiators, chimney walls,
televisions or solar radiation,
- above a cooker that is likely to give off steam and grease,
- on cold walls,
- between units or behind curtains or other objects that might
disturb temperature recording for the ambient air in the room,
- in a room that is heavily loaded with dust or where the
atmosphere is corrosive,
- near air currents that may come from doors or windows.
1500
6 Climapro
2
Rf Installation
All of the measurements in this chapter are expressed in mm.
6.1 Dimensions
6.1.1 Room thermostat
62.5
34
6
173
6.1.2 Wall support for Climapro
2
Rf
66
27
58
6
6.2 List of contents
- This list contains the following:
- Climapro
2
RF programmable room thermostat
- wall support for Climapro
2
RF
- packet containing 2 fixing screws with rawlplugs
- 4 “AA LR6 " alkaline batteries.