Glow-worm Climapro 2 RF, Installation Instruction, Page: 4 / 16

0020094581_01 - 08/10 - Glow-worm
- 2 -
INTRODUCTION
INTRODUCTION
1 Instructions guidance
1.1 Product documentation
The instructions are an integral part of the Climapro
2
RF and
must be handed to the user on completion of the installation in
order to comply with the current regulation.
• Carefully read the manual, to enable safe installation, use
and servicing. No liability can be accepted in the event
of damage for not complying with the guidance in this
instruction manual.
•
Associated documents
- User instructions
1.2 Explanation of symbols
e
DANGER: Risk of electric shock.
ATTENTION: Risk of damage to the Climapro
2
RF
or to its vicinity.
IMPORTANT: Useful information.
2 Climapro
2
Rf description
2.1 Regulation and statutory requirements
CE Mark
he CE mark indicates that the appliances described in this
manual are in compliance with the following directives:
- European Directive Num. 2004-108 of the European
Parliament and the Council regarding electromagnetic
compatibility
- European Directive Num. 2006-95 of the European
Parliament and the Council regarding low voltage
- Directive relating to telecommunications equipment (Council
of the European Community directive R&TTE 99/5/CEE).
2.2 Operational Diagram
The room thermostat communicates with a control unit via a
wireless connection.
1
2
3
4
Legend
1 Wall support for Climapro
2
Rf
2 Control unit
3 Room thermostat
4 batteries
3 Safety instructions and regulations
3.1 Safety instructions
All work inside Climapro
2
RF must be carried out by a qualified
professional or Glow-worm’s After-Sales Service.
Climapro
2
RF must only be installed by a qualified and
responsible professional.
Respect the basic safety instructions:
• Turn off the control unit’s power supply.
• When work on the appliance is completed, perform an
operational test and check for safety.
3.2 Regulations
During the installation and activation of the appliance, the
decrees, directives, technical regulations, standards and
clauses hereafter must be complied with in the versions that are
currently in force.