Glow Stream NDI, Quick Start Manual, Page: 6 / 21

4
Step 2: Set the camera’s IP address
Once your camera and computer are connected, either through a network switch or directly
with a crossover cable, you should set your camera’s IP address to something compatible with
your network. Y our camera’s default IP address is 192.168.5.163. To use the camera on a
network, must change this to another address within your network’s IP address range.
A. Prepare computer to access camera
First, you must change the computer’s network settings to
match the camera, in order to access the camera’s settings
from the computer. In Windows 10:
1. Open the Network Status window.
2. Under the Advanced Network Settings section, click
Change Adapter Settings.
A crossover cable is a special type of ethernet cable used to connect two devices
directly, without using a network switch. A standard ethernet cable will not work
for this purpose.
A crossover cable is included with your camera.