Glow Fire Uranus
18
Stand: 09/2020
Version: 1
OFF:
Disables control panel
functions and remote control.
Turns the flame effect off.
2.
Press again.
Flame effect
switched off. Machine in standby.
All functions switched off.
Timer
TIMER button:
Controls timer
settings to turn off the heater
at the selected time. Setting
range from 0.5 to 8 hours.
1.
Press once
. Indicator light
switched on. Timer is set to 0.5
hours.
2.
Press again until the desired
setting is reached.
Display lamps
indicate the setting.
Flame
FLAME button
: Makes the
flame effect darker and
brighter.
NOTE:
Flame effect
will remain on until the power
button is turned off. Flame
effect must be on to turn the
heater on.
1. P
ress once.
The brightness of
the Flame effect changes.
2. P
ress again
until the desired
setting is reached.
Color
COLOR button:
The color of
the flame effect changes.
NOTE:
Flame effect color will
remain until the Power button
is turned off. The Flame Effect
color must be on to turn the
heater on.
1.
Press once.
The color of the
flame effect changes.
2. Press again until the desired
setting has reached a total of 3
colors.
Temperature
TEMPERATURE button:
Switches the heating on and
off.
NOTE:
Press the button for 5
seconds, the temperature
setting switches from °C to °F.
In the same way from °F to °C.
1.
Press once:
touch control panel
display is activated
2.
Press again:
until the desired
setting is reached. Digital display
shows setting cycles, see below:
Heater
HEATING key:
Switches the
heating on and off.
NOTE:
The heater only works
when the flame effect is on. If
the flame effect is off, the
heater will not turn on.
NOTE:
To prevent
overheating, the heater fan
blows cold air for 8-10 seconds
before the heater turns on and
after it turns off.
1. press once.
The control lamp
lights up. Blower blows cold air for
10 seconds. The 750 W heater
switches on and blows out warm
air.
2. press again.
The control lamp
lights up. The 1500W heater turns
on and blows out warm air.
3. press again.
The heater
switches off. The blower blows cold
air for 10 seconds, allowing the
heater to cool down and then
switches off.
Back Lights
BACKLight button:
Changes
the color of the backlight
NOTE:
The rear lights remain
on until the power switch is
turned off. Works only when
touched on the control panel.
1.
Press once.
Flame color effect
changes.
2.
Press again
until the desired
setting is reached. 3 colors.
3.
Press the third time
, the
backlight is switched off.
